Biofilm Eliminator will help eliminate biofilm and reduce chlorine/chemical demand. Water and air quality will improve just above the surface of the water. All systems with splashing water or an air sparge produce an aerosol. The aerosol then behaves like smoke and can travel through the entire house or building. Each droplet may contain pathogenic bacteria such as Legionella and is one of the main reasons for sick building syndrome, and disease transmission from pools and spas. Biofilm Eliminator can solve this problem.

Warm hot tub water can provide the ideal breeding ground for bacterial growth. As this begins to attach itself to pipework and surfaces, biofilm can begin to form. Biofilm is extremely resistant against Chlorine and can harbour bacteria and other pathogens. Gold Horizons Spa Super Cleanse is a highly effective cleansing agent that penetrates the biofilm and helps remove the bacteria.

Instructions

1. Remove and thoroughly clean cartridge filters before returning to service.
2. Ensure free chlorine or total bromine levels are within the recommended range of 3 - 5mg/I (ppm).
3. Only use Gold Horizons Spa Super Cleanse prior to draining down your hot tub.
4. Caution: Do not use hot tub during treatment.
5. Remove any soft head rests that may be fitted.
6. Isolate any chlorine or bromine feeder prior to Spa Super Cleanse treatment.
7. Refer to table below for number of tablets required per treatment.
8. Wear protective gloves and eye protection when handling product. Remove the required number of sachets from the sealed container. Use scissors to cut open the sachet and carefully drop the tablet into the hot tub water with the pump(s) running.
9. DO NOT touch tablets or allow them so get wet prior to adding to the hot tub water.
10. Leave the deep clean treatment for 60 minutes with the pump(s) running, After treatment, turn the pump(s) off and drain all the water to waste.
11. Refill with fresh water and return hot tub water to recommended chemical levels.

Dose Rates